麻豆精选

• PhD in Ceramic Science & Engineering, 1984
• BSc Honours in Ceramic Science & Engineering ,1981
• Chartered Engineer
• Fellow of the Institute of Materials, Minerals and Mining (IOM3)
• Fellow of the European Ceramic Society (ECerS)
• Fellow of the American Ceramic Society (ACerS)
• Fellow of the Association for Microwave Power in Europe for Research and Education (AMPERE)
• Invited Member of the EU Academy of Sciences

As Deputy Head of College, Jon does not currently have any teaching commitments though he helps out whenever additional support is needed in his School.

Current PhD students include:

• Ben Baker
• Arjin Boonruang
• Jon Kenny
• Matt Porter
• Jinxin Sun
• GuoYang (Victoria) Ye

A similar number of postdoctoral researchers are also supervised.

1. Honorary Professor, Kunming University, China, 1999 – present.
2. Visiting Professor, Beijing University of Chemical Technology, China, 2006 – present.

Editorial positions since 2013

1. Member of the Editorial Advisory Board, Advances in Applied Ceramics, Maney Publishing, London, UK, 2000 - present.
2. Member of the Editorial Board, Journal of Ceramic Science and Technology, Göller Verlag GmbH on behalf of the German Ceramic Society, Germany, 2014 – present.
3. I am an Associate Editor of Applied Ceramic Technology, published by the American Ceramic Society, 2016 – present.
4. I was an Editor of Cogent Engineering, published by Taylor & Francis, 2016 – 2017.

Media presentations since 2013

1. BBC One, Cubic boron nitride, The One Show, BBC 1, June 2013.

Research grants won since 2013

1. EPSRC £358,390 (with B Vaidhyanathan, Loughborough University, PI) Nanomaterials and structures for superior implants, Nanoplants (2014-17).
2. EU Horizon 2020 €680,556 (with D Sciti, CNR-ISTEC, Italy, PI) Next generation ceramic composites for combustion harsh environments and space (2016-20). Total budget €8,033,035; 12 partners involved.
3. AFRL $130,470 High temperature composites using microwave enhanced chemical vapour infiltration (2016-2019).
4. MBDA £75,000 Processing ceramics and composites (2016-2018).
5. EPSRC £423,150 (with J Irvine, Univ. of St Andrews, PI, and 7 other investigators from the Universities of St Andrews, Bath and Edinburgh) Multiscale tuning of interfaces and surfaces for energy applications (2016-2020). Total budget £2,075,702.
6. EU Horizon 2020 €195,455 Effect of rare-earth doping elements on the mechanical and oxidation resistance performance of SiC coated C fibre / ZrC composites for high temperature applications (2018-2020).
7. ATI £269,042 Excite: Ox Ox CMCs (2018-2020). Total programme budget £9,344,041.

Invited, Plenary and Keynote talks since 2013

1. Invited lecture 37^th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, USA. January 2013.
2. Invited lecture ibid.
3. Keynote 13^th International Conference of the European Ceramic Society, Limoges, France, June 2013.
4. Invited lecture ‘Processing and Properties of UHTC Composites’, Binner JGP. 13^th International Ceramics Congress, Montecatini Terme, Tuscany, Italy, June 2014.
5. Keynote lecture 11^th Conference on Solid State Chemistry, Trenčianske Teplice, Slovakia, July 2014.
6. Invited lecture 5^th International Congress on Ceramics, Beijing, China, August 2014.
7. Plenary lecture PSA 2014 Conference and Exhibition, Manchester, UK, September 2014.
8. Plenary lecture ‘Ultra-High Temperature Ceramics: Processing, Properties and Applications’, Binner J, 90^th DKG Annual Conference, Bayreuth, Germany, March 2015.
9. Keynote lecture ‘Ultra-High Temperature Composites’, Binner J, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications III, Gold Coast, Australia, April 2015.
10. Keynote lecture 'Ultra-High Temperature Composites: Processing, Performance and Future', Binner J, Anish Paul, Prabhu Ramanujam, Virtudes Rubio, Bala Vaidhyanathan, Saranya Venugopal, Penxiang Zheng, Ji Zou, 14^th International Conference of the European Ceramic Society, Toledo, Spain, June 2015.
11. Invited lecture ‘Ultra-High Temperature Ceramics: Processing, Properties and Applications’, Binner J, UK-USA Dynamic Materials Symposium, Defence Academy, Shrivenham, UK, September / October 2015.
12. Invited lecture ‘SiCf-SiC composites for energy applications’, Binner J and D’Angio A, MatiSSE Workshop, Joint Research Centre – Institute for Energy and Transport, Petten, the Netherlands, November 2015.
13. Invited lecture ‘Creating Ultra-High Temperature Ceramic Matrix Composites’ Binner J, 40^th International Conference & Exposition on Advanced Ceramics & Composites (ICACC), Daytona Beach, Florida, USA, January 2016.
14. Invited lecture ‘Progress in Manufacturing High and Ultra-High Temperature Ceramic Matrix Composites’, 15^th European Ceramics Society conference, Budapest, July 2017.
15. Invited lecture ‘Ultra High Temperature Ceramic Matrix Composites Based On Carbon Fibres’, 15^th European Ceramics Society conference, Budapest, July 2017.
16. Plenary lecture ‘Designing Advanced Ceramics and Composites’, Binner J, CerModel 2017, Trento, Italy, July 2017.
17. Invited paper ‘Processing and properties of ultra-high temperature ceramic matrix composites’, CICC-10, Int. Conf. on High-Performance Ceramics, Nanchang, China, Nov 2017.
18. Invited paper ‘Designing the processing of advanced ceramics and composites to yield the required properties’, in “Advancing Frontiers of Ceramics for Sustainable Societal Development - International Symposium in Honor of Dr. Mrityunjay Singh” – being held during the 42^nd International Conference on Advanced Ceramics & Composites (ICACC 2018), Daytona Beach, Florida, January 2018.
19. Invited paper ‘Ultra-high temperature ceramic composite materials’, 42^nd International Conference on Advanced Ceramics & Composites (ICACC 2018), Daytona Beach, Florida, January 2018.
20. Invited paper ‘Boron carbide armour research’, Ceramic, Composite and Optical Materials Center (CCOMC), Armor Ceramic Subgroup Program, held during the 42nd International Conference on Advanced Ceramics & Composites (ICACC 2018), Daytona Beach, Florida, January 2018.
21. Keynote paper ‘Developing high and ultra-high temperature ceramic matrix composites’, 6^th  International Conference & Exhibition on Materials Science & Chemistry, Rome, May 2018.
22. Invited paper ‘High and ultra-high temperature ceramic matrix composites’, International Congress on Ceramics, ICC7, Iguassu Falls, Brazil, June 2018.

Conference organisation since 2013

1. Member of the International Advisory Committee, 13^th European Ceramics Society, Limoges, France, June 2013.
2. Member of the International Organising Committee, Ceramic Processing Science 12, Portland, Oregon, USA, August, 2013.
3. Member of the International Advisor Board, 13^th International Ceramics Congress, Montecatini Terme, Italy, June 2014.
4. Member of the International Advisory Board, German Ceramic Society (DKG) Annual Meeting, Bayreuth, Germany, March 2015.
5. Member of the Scientific Committee, Ultra High Temperature Ceramics: Materials For Extreme Environment Applications III, Gold Coast, Australia, April 2015.
6. Chair, Theme 1 – Innovative processing and synthesis, 14^th European Ceramics Society, Toledo, Spain, June 2015.
7. Member of the Technical Programme Committee, 2015 International Conference on Ceramic Science and Technology (CST 2015), Shanghai, China, July 2015.
8. Symposium Organiser, Symposium 12 - Materials for Extreme Environments: Ultra-High Temperature Ceramics (UHTCs) and Nano-Laminated Ternary Carbides and Nitrides (MAX Phases), 40^th International Conference and Expo on Advanced Ceramics and Composites (ICACC’16) Daytona Beach, Florida USA, January 2016.
9. Member International Organization Committee, International Conference on Ceramic Processing Science (ICCPS-13), Nara, Japan, May 2016.
10. Member of the Organisation Committee, Materials for extreme environments: Ultrahigh-temperature ceramics and nano-laminated ternary carbides and nitrides (MAX phases) at the 9th International Conference on High Temperature Ceramic Matrix Composites and Global Forum on Advanced Materials and Technologies for Sustainable Development, Toronto, Canada, June 2016.
11. Session organiser, High Temperature Processes and Advanced Sintering, 15^th European Ceramics Society conference, Budapest, July 2017.
12. Member Technical Programme Committee, 3rd Int'l Conference on Ceramic Science and Technology (CST 2017), Jeju Island, South Korea, July 2017.
13. Conference Chair, Ultra High Temperature Ceramics: Materials For Extreme Environment Applications IV, Windsor, UK, September 2017.
14. Symposium organiser, Advanced MAX/mxene phases and UHTC materials for extreme and high temperature environments, 42^nd International Conference And Exposition On Advanced Ceramics And Composites, ICACC2018, Daytona Beach, Florida, USA, January 2018.
15. Symposium co-organiser, Symposium N – High and Ultra High Temperature Ceramics, International Congress on Ceramics, ICC7, Iguassu Falls, Brazil, June 2018.
16. Symposium co-organiser, Integration Technologies for Energy and Environmental Applications, 12^th International Conference on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-12), Singapore, July 2018.
17. Member of the International Advisory Committee (IAC) of the 11^th Int. Conf. on High Performance Ceramics, CICC-11, Kunming, China, May 2019.
18. Chair, Symposium 2: High Temperature Processes and Advanced Sintering, 16^th European Ceramics Society conference, Turin, June 2019.
19. Chair, Symposium 7: Ultra-high temperature ceramics (UHTCs) and nano-laminated ternary carbides and nitrides (MAX phases), High Temperature Ceramic Matrix Composites, HT-CMCs 10, Bordeaux, France, September 2019.

Membership of international bodies since 2013

1. UK representative of the International Ceramics Federation, 2011 – present.
2. Member of the Industry and Technical Policy Board, IOM3, 2012 – present.
3. Chair of the UK Ceramic Society, 2012 – 2016.
4. President of the IOM3, 2013 – 2014.
5. Past-President of the IOM3, 2015 – 2016.
6. R&D Work Programme Lead, European Ceramic Society Council, 2015 – present.
7. Member of the EPSRC Engineering Strategic Advisory Team, 2015 – present. Chair from June 2018.
8. Member of the Corporation Board, National College of High Speed Rail, NCHSR, 2015 - present.
9. Chair of the Built Environment Sub-Committee and Member of the Curriculum Sub-Committee (2016-2017) and Member of the Audit Committee (2017-present), NCHSR.
10. Member of the Robert L. Coble Award for Young Scholars Award Committee, ACerS, M – present.

President-Elect, European Ceramic Society, 2017-2019